3-to-1 DC Splitter — Power Three Cameras, One Supply 🔌📹
| 🔌 CGCCABLE 3-to-1 DC Power Splitter Cable — 5.5×2.1mm, 1 Female to 3 Male Plugs Run three CCTV cameras or LED strips from a single DC power adapter. Clean 3-way power distribution without extra power bricks. ⚡ 1 Female to 3 Male Configuration One 5.5×2.1mm female input connects to your DC power supply. Three 5.5×2.1mm male outputs deliver power to three devices. 🔩 Universal 5.5×2.1mm Barrel Size Standard DC barrel fits virtually all CCTV cameras, LED strips, and small DC electronics. No adapters or converters needed. 📏 Clean 3-Way Split Cable splits neatly from one input to three outputs. Organized power distribution without a bird’s nest of wires. 🔧 Simple Setup Connect your single DC power adapter → female input. Plug three male outputs into three devices. Instant 3-way power. 🔄 Ideal For: 3-camera CCTV setups Multi-LED strip installations Security camera systems Outdoor surveillance DVR/NVR power distribution DIY multi-device DC power 📦 Single Splitter — Three Devices Live One power brick, three cameras. Cleaner install, fewer outlets used. 👉 BUY NOW:https://cgccable.com/product/dc-power-splitter-cable-32443 #CGCCABLE #DCSplitter #DC5521 #CCTV #SecurityCamera #LEDStrip #PowerSplitter #3to1 #Surveillance #DVR #NVR #CCTVAccessories |
Related posts
Single-Conductor Red Wire 18AWG: When You Only Need One Color
Most low-voltage wire comes as a red/black pair. But sometimes you need a single color — and buying a paired cable means wasting half o...
Transparent Speaker Wire: Why You Can See Through Good Cable
Speaker wire with a clear jacket looks different for a reason — and it is not just for show.🔍 Why transparent: A clear jacket lets you ...
Short SAE Sidewall Port (30cm): A Compact Flush-Mount 12V Point
Sometimes you need a flush-mount SAE port, but the standard long-lead version is overkill. A 30cm short-lead port fits tight spaces.🔌 W...
SAE Extension Cable: Extending a 12V Connection the Right Way
An SAE extension is the simplest SAE product — a male on one end, a female on the other — and also the one where polarity mistakes happ...
SAE Y-Splitter 2-to-1: Combining or Splitting 12V Accessories
Two SAE devices, one battery lead — or one device fed from two sources. A 2-to-1 splitter covers both, with the same caveat as any spli...
SAE Polarity Reverse Adapter: Understanding the SAE Polarity Trap
SAE connectors have a polarity trap that catches even experienced installers. Here is how it works and how to avoid it.⚠️ The trap: SAE...
Fused SAE Cable with O-Ring: The Right Way to Connect to a Battery
Connecting an SAE accessory directly to a battery without a fuse is asking for trouble. A fused cable is the correct approach.🔋 What th...
SAE Y-Splitter 1-to-2: Powering Two Devices from One SAE Source
One SAE power source, two devices to feed. A 1-to-2 Y-splitter is the answer — with one important caveat.🔌 What the splitter does: It t...
Flush-Mount SAE Sidewall Port: A Clean 12V Connection Point
A dangling SAE cable is functional but ugly. A flush-mount sidewall port turns it into a built-in feature.🔌 What a sidewall port does: ...
Solar Cable to O-Ring Connector: The Direct-to-Battery Link Explained
Most solar cables end in MC4 connectors for panels. But the other end often needs a very different termination: an O-ring.🔌 What an O-r...
Solar Extension Cable 10AWG: Why PV Cable Is Different from Regular Wire
Not all cable survives on a roof. Solar installations need photovoltaic (PV) wire — engineered for conditions that kill standard cable ...
4-to-1 Solar Branch Connectors: Wiring Four Panels Together
Four-panel arrays push the limits of simple series wiring — a 4-to-1 branch is how DIY installers keep it clean.🔀 The series/parallel d...