4-to-1 DC Splitter — One PSU, Four Devices 🔌📹
| 🔌 CGCCABLE 4-to-1 DC Power Splitter Cable — 5.5×2.1mm, 1 Female to 4 Male Plugs Maximize your DC power supply. Run four cameras or LED strips from a single adapter. 4-way power distribution without the outlet overload. ⚡ 1 Female to 4 Male Configuration One 5.5×2.1mm female input from your power adapter. Four 5.5×2.1mm male outputs to power four devices simultaneously. 🔩 Standard 5.5×2.1mm Barrel Universal DC barrel connector size. Works with CCTV cameras, LED strips, IP cameras, and most 12V DC devices. 📏 4-Way Clean Split Cable splits neatly into four outputs. Manageable, organized power distribution for multi-camera installations. 🔧 Plug & Play — Zero Configuration Connect power supply to female input → plug four male outputs into your devices. Done. No settings, no setup. 🔄 Perfect For: 4-camera CCTV systems Multi-zone LED strip lighting Security DVR/NVR installations Outdoor security arrays Multi-device DC power setups Surveillance camera clusters 📦 Single Splitter — Maximum Coverage One power adapter, four devices. Fewest outlets, cleanest install, maximum coverage. 👉 BUY NOW:https://cgccable.com/product/dc-power-splitter-cable-32444 #CGCCABLE #DCSplitter #DC5521 #CCTV #SecurityCamera #LEDStrip #PowerSplitter #4to1 #Surveillance #DVR #NVR #CCTVAccessories |
Related posts
Single-Conductor Red Wire 18AWG: When You Only Need One Color
Most low-voltage wire comes as a red/black pair. But sometimes you need a single color — and buying a paired cable means wasting half o...
Transparent Speaker Wire: Why You Can See Through Good Cable
Speaker wire with a clear jacket looks different for a reason — and it is not just for show.🔍 Why transparent: A clear jacket lets you ...
Short SAE Sidewall Port (30cm): A Compact Flush-Mount 12V Point
Sometimes you need a flush-mount SAE port, but the standard long-lead version is overkill. A 30cm short-lead port fits tight spaces.🔌 W...
SAE Extension Cable: Extending a 12V Connection the Right Way
An SAE extension is the simplest SAE product — a male on one end, a female on the other — and also the one where polarity mistakes happ...
SAE Y-Splitter 2-to-1: Combining or Splitting 12V Accessories
Two SAE devices, one battery lead — or one device fed from two sources. A 2-to-1 splitter covers both, with the same caveat as any spli...
SAE Polarity Reverse Adapter: Understanding the SAE Polarity Trap
SAE connectors have a polarity trap that catches even experienced installers. Here is how it works and how to avoid it.⚠️ The trap: SAE...
Fused SAE Cable with O-Ring: The Right Way to Connect to a Battery
Connecting an SAE accessory directly to a battery without a fuse is asking for trouble. A fused cable is the correct approach.🔋 What th...
SAE Y-Splitter 1-to-2: Powering Two Devices from One SAE Source
One SAE power source, two devices to feed. A 1-to-2 Y-splitter is the answer — with one important caveat.🔌 What the splitter does: It t...
Flush-Mount SAE Sidewall Port: A Clean 12V Connection Point
A dangling SAE cable is functional but ugly. A flush-mount sidewall port turns it into a built-in feature.🔌 What a sidewall port does: ...
Solar Cable to O-Ring Connector: The Direct-to-Battery Link Explained
Most solar cables end in MC4 connectors for panels. But the other end often needs a very different termination: an O-ring.🔌 What an O-r...
Solar Extension Cable 10AWG: Why PV Cable Is Different from Regular Wire
Not all cable survives on a roof. Solar installations need photovoltaic (PV) wire — engineered for conditions that kill standard cable ...
4-to-1 Solar Branch Connectors: Wiring Four Panels Together
Four-panel arrays push the limits of simple series wiring — a 4-to-1 branch is how DIY installers keep it clean.🔀 The series/parallel d...